Description

Electrical or Steam Heating
For the wet cleaning system are not required
High temperatures, in fact the temperature is usually a little bit higher than the one of the room.
To avoid linen's troubles due to thermic shocks the machine uses a indirect steam heating avoiding that micro-particles come in contact with the most sensitive fabrics damaging them.

Washing Machine
Speed control
The machine is provided with an inverter with three sets of parameters to obtain.
Spin speed between 200 and 1000 rpm.
Washing speed between 15 and 50 rpm.
Drum oscillation without rotations for a very soft washing.

The Printer
At the end of the cycles the graphics can be printed by a remote printer connected to the machine.
In this way it is possible to show to the client the day and the time of the cycle, as well as the operator's name, the used program the highest temperature, the cycle length and the humidity trend.

Soap Pumps
The machine is furnished with 3 pumps (but it can be connected up to 12 pumps), which are controlled directly by the washing machine microprocessor or with it own microprocessor. On the top of the machine is provided with light, which advise if one of the detergents is finished.
The time of injection and the mix of the detergents can be programmed. 
The microprocessor manage the mix of the detergents as programmed and give to each washing cycle the right quantity.
All the washing machines for Wet Cleaning Mr Dobi are provided with a pump with injection in the center the machine door.